Photocell PR1a

Parts and Accessory

Photocell PR1a:
with built in infrared transmitter and receiver.
Lichtschranke PR1a
Reflectror PR1a-Ref:
Photocell reflector to mount on a fastening bracket BBG or tripod TRI128.
PR1a-Ref
Reflectror REFL6:
Photocell reflector with hole in the middle to screw it e.g. on a wodden post.
Reflector REF6
Fastening Bracket BBG:
to mount on a wooden post and fasten the photocell or reflector PR1a-Ref.
Befestigungsbügel BBG
Stativ TRI128:
to fasten the photocell or reflector PR1a-Ref.
Stativ TRI128
Stop-Cabel 001-XX:
to connect the finish photocell with timing device. With this cable the photocell is supplied by the timing device. The following cable length is available: 1 m (3.3 ft), 10 m (33 ft), 20 m (66 ft) and 30 m (98 ft).
Kabel 001-XX
Start-Cabel 002-XX:
to connect the start photocell with timing device. With this cable the photocell is supplied by the timing device. The following cable length is available: 1 m (3.3 ft), 10 m (33 ft), 20 m (66 ft) and 30 m (98 ft).
Kabel 002-10
Banana-Cabel 000-XX:
to connect the photocell with the timing device. This cable does not supply the photocell, but it is recommended if you have a long distance between the photocell and the timing device (the photocell needs a internal battery or external power supply). The following cable length is available: 1m (3.3 ft), 2 m (6.6 ft), 5 m (16 ft) and 10 m (33 ft).
Kabel 000-10
Cable Reel KTXXX:
If the photocell is far from the timing device it is possible to extent the banana cable 000-XX with a cable reel. The cable reel has a 2-wire steel cable (extra strong army version) with banana plugs at one end of the cable. The end of the cable is built in the cable reel and on the cable reel you have two banana sockets. The following cable reels are available: KT120 (120 m / 394 ft), KT150 (150 m / 492 ft), KT300 (300 m / 984 ft) and KT500 (500 m / 1640 ft).
Cable Reel KT150